Hama "MicroPro II" Lens Pen
No longer able to ignore the smudge on the lens? The "MicroPro II" lens pen for camera cleaning gives you a clear view again. No speck of dust on eyepieces and mobile phone cameras is safe from the cleaning pen.
Quality based on German standards
Highlights
Particularly long service life
Particularly long service life as dry cleaning means that no liquid can dry out or run out
Immediately ready for use
Immediately ready for use as the screw closure ensures automatic activation of the velvety surface, no need to activate the fibers separately
-
Technical Specs
Design (Colour, Pattern, Motif, Series) Colour Black Shade of colour Black Physical Properties Material Plastic Material Material Cleaning Spike Special Velvet Special Feature Integrated cleaning brush Size & Weight Diameter Cleaning Spike 5 mm Nib Length 9 cm Field of Application Recommended Use Smartphone -
More product information
- Allows highly effective and gentle cleaning of all optical surfaces, specially designed for eyepieces and smartphone cameras
- Original lens pen
- Removes dust, grease spots and other smudges
- Does not dry out
- With a lens brush for dry precleaning
- Special coating for high-quality lenses
- Small and handy pen with a clip for attachment and an ergonomic design
- Flat velvety surface
- Diameter: 5 mm, especially for eyepieces and smartphone cameras
-
What's in the Box
- 1 "MicroPro II" lens pen
-
Note for Consumers
Please note the following when using the lens pen:
1. Push the brush forward out of the protection chamber using the black slide. Remove the dust particles using the lens brush.
2. Remove the opposite cap. Slowly remove the dirt using the special velvet in short circular movements.
3. For difficult to remove dirt, breathe on the lenses and repeat procedure.
Not suitable for cleaning camera mirrors. The lens pen is only suitable for small optical surfaces. -
Manufacturer information
Hama GmbH & Co KG, 86652, Monheim, https://hama.com
FAQs
-
When I touch the lens pen with my finger, the finger is marked in black. Does the black colour have any effects on the lens when it is cleaned?
The lens pen has been designed for being used on a lens and therefore leaves traces on other materials. The carbon cleaning tip is immediately ready for use and allows you to clean all optical surfaces quickly, gently and thoroughly.
It is important that you remove the dirt with the lens pen in short circular movements from the inside to the outside of the lens. By doing so, the dirt is dissolved and absorbed by the pad.
Please note the following when using the lens pen again: Put on the cap again, a rotary movement activates the chemical compound once again so that the lens pen can be used for about 50 to 100 times depending on the degree of soiling. Afterwards it should be replaced. Laboratory tests have shown that the lens pen cleans lenses much more gently than conventional cleaning systems.
If you use the lens pen as described, you will get a clean filter/lens glass.